CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

zero flux boundary subroutine

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 26, 2006, 03:27
Default zero flux boundary subroutine
  #1
Gavin
Guest
 
Posts: n/a
Hi experts,

I am sloving a gas diffusion problem with a solid cell type in my model. I have set zero flux for scalars in default wall boundary region. However, I suspect calculated resluts is not reasonable and some of mass miss. In previous discussion in this forum, I see someone said there is a zero flux boundary subroutine. Do you know the name of this subroutine in STAR-CD? Thanks for your help.

Gavin
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
what specified flux mean in boundary condition? lucy FLUENT 0 January 5, 2009 05:13
Inlet boundary subroutine procedure Johan Siemens 1 June 15, 2007 17:41
ODD: no UDS flux across interior boundary Bob FLUENT 1 February 25, 2002 20:15
user subroutine of inlet boundary raymond Siemens 4 December 6, 2001 06:44
UDF - Boundary Heat Flux- Calogine W. Didier FLUENT 1 December 1, 1999 12:02


All times are GMT -4. The time now is 12:04.