CFD Online Logo CFD Online URL
Home > Forums > Siemens


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 3, 2006, 10:23
Default STAR CCM+ v2
Posts: n/a

Does anyone has information about STAR CCM+ V2? What else could I expect compared to V1. Did any of you attend the conference in London 2 weeks ago ?

I heard there is underhood features in it now, do you know the other new features it has inside? i am wondering if I should upgrade from v1 to v2.


  Reply With Quote

Old   April 3, 2006, 11:30
Default Re: STAR CCM+ v2
William Blake
Posts: n/a
The primary new feature of the pending 2.02 release of STAR-CCM+ is the integration of next-generation meshing tools into the existing STAR-CCM+ product. The goal of this integration is to shift your starting point upstream. Rather than requiring you to import a volume mesh generated outside STAR-CCM+ (in pro-am or a 3rd party tool), you can now import a surface mesh and proceed through the Volume Meshing > Solution > Analysis procedure without ever leaving STAR-CCM+. In addition to streamlining your overall process and allowing you to master just a single tool, this release provides a much more flexible product where you can easily iterate between meshing and solution as needed to achieve a high quality CFD result.

For this release, previous meshing technology in ammbatch was completely rewritten from the ground up. The goals of the rewrites included:

* Improvements in CPU and memory use over ammbatch meshers

o Surface wrapper: ~6x faster, ~3x memory reduction

o Tet mesher: ~3x faster, ~4x memory reduction

o Poly mesher: ~3x faster

o Trimmer: ~3-4x faster, ~2x memory reduction

o Prism meshing (subsurface + extrusion): ~10x faster, ~2x memory reduction

* Improvements in mesh quality

o Surface wrapper: Much better retention of features

o Surface remesher: Accurately coarsens/refines surface meshes while maintaining original geometry

o Poly mesher: Uses solver-based validity metrics to optimize mesh

o Trimmer: High fidelity to surface details

o Prism meshing: Quality metrics built into subsurface process to guarantee high quality subsurface

* Improvements in mesh robustness

o Surface wrapper: 100% guarantee of a closed, manifold surface after wrapping

o Poly mesher: Post processing codes to eliminate negative volume or invalid cells

o Trimmer: 100% guarantee of zero "unresolved cells" or CP errors

o Prism meshing: Post processing of extrusion cells to eliminate negative volumes

* Improvements in coordination between meshers

o New embedded "pipeline" takes the mesh through the various meshers without relying on disk I/O

o Pipeline model gives the user the ability to generate a high quality mesh with just one click

At this point, this meshing release cannot yet be considered a replacement for pro-am. There are many powerful features in pro-am (manipulating meshes, set manipulation, etc.) that have not been migrated into STAR-CCM+. In cases where you really need a fine tuned control over your meshing process, you must still rely on pro-am. For many cases, though, where you want to import a surface, set some meshing options, and generate a mesh without extensive interaction, the STAR-CCM+ meshing functionality is the ideal choice. Unlike STAR-Design and the other STAR-CAD products that give you "one click" meshing but minimal control, STAR-CCM+ 2.02 will expose many more options in the meshers while still preserving the "one click" idea. In addition, there are defined exit/entry points in STAR-CCM+ that allow you to get your model into pro-am, tweak it, and get it back into STAR-CCM+. The two places where this is possible are:

* Modifying (fixing, improving, etc.) a surface mesh generated in STAR-CCM+:

o Export any surface mesh from STAR-CCM+ into .dbs format.

o Read the .dbs file into pro-am, modify it as needed, then re-export.

o Reimport the modified (or new) .dbs file into STAR-CCM+.

* Modifying (fixing, improving, etc.) a volume mesh generated in STAR-CCM+:

o Export a generated volume mesh using the .ccm format.

o Read the .ccm file into pro-am, modify and re-export.

o Read the modified .ccm file back into STAR-CCM+.


* Surface-to-surface radiation

* Discrete ordinate radiation

* Heat exchanger (radiator) Method 1

* Transition model (laminar to turbulent)

* Volume of fuid (VOF)

* Multi-species (active scalars)

* Eddy-breakup combustion

  Reply With Quote

Old   April 3, 2006, 15:03
Default Re: STAR CCM+ v2
Posts: n/a
also got moving mesh (rotating, not just mrf) also got speed improvments. I have had a crack at the beta (its been available for a while) and it seems really good, certainly the mesh side is so easy, and has some really clever touches. I havent used much of the other stuff, some vof, which is comet vof and so should be fairly good.
  Reply With Quote

Old   April 3, 2006, 16:31
Default Re: STAR CCM+ v2 - have a go with the macros!
Posts: n/a
You can record a macro java.macro that:

read case .sim

change one parameter

run the case for n iterations

save the post-processing

save the new .sim

then running via shell command is:

starccm+ -batch java.macro > output.log

and also:

starccm+ -help as in star to run multiple processors,

running in parallel is as easy as in star-cd. May be easier.


  Reply With Quote

Old   April 3, 2006, 22:21
Default Re: STAR CCM+ v2
Dennis Nagy
Posts: n/a
Send me an e-mail and we'll send you full details on what is in STAR-CCM+ V2. Best regards, --Dennis
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
how to export a mesh from star design to star cd aounallah Siemens 4 March 6, 2009 07:22
Star Design to Star-CD(Prostar) AB Siemens 5 October 28, 2004 12:21

All times are GMT -4. The time now is 22:43.