CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Loosing baffles while creating a volume mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 9, 2006, 03:52
Default Loosing baffles while creating a volume mesh
  #1
Susanne
Guest
 
Posts: n/a
hello,

i would like to run a mrf fan model. The problem is that I loose the internal baffles during the creation of a tetrahedral volume mesh with Star4.0_amm. I already tried to define the baffles as shells and to treat them like internal features. Could some body help me?

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX-Mesh, guide vanes (baffles) and problems. R. Janny CFX 2 October 1, 2012 05:57
Incylinder Dynamic Mesh Creating Negative Volume Sujtih FLUENT 3 August 1, 2006 16:53
Mesh problems for a stirred vessel with baffles! UY CFX 0 September 14, 2005 11:19
creating volume from a surface file for CFD Amir Main CFD Forum 0 December 24, 2002 03:08
creating volume by stitching faces Prabhu.B FLUENT 3 June 27, 2002 20:33


All times are GMT -4. The time now is 10:09.