CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   calculating eccentricity of flow (https://www.cfd-online.com/Forums/siemens/55355-calculating-eccentricity-flow.html)

 rajesh May 9, 2006 08:14

calculating eccentricity of flow

hello all

i want to get the eccentricity of flow..i mean if a flow happens in a circular pipe,i want to calulate the distance from the centre at which the maximum flow rate happens.How can i calulate this distance in STar.

Rajesh

 Ralphie May 9, 2006 09:39

Re: calculating eccentricity of flow

Define a cylindrical coordinate system for your pipe and load the velocity magnitude. Put all cells with the highest velocity magnitude in a set. Load the x-coordinate for your new coordinate system and plot the cells. They should be coloured according to their distance from the pipes centre.

 rajesh May 10, 2006 01:39

Re: calculating eccentricity of flow

Dear Ralphie

thanks a lot,it worked.but i have a doubt whether the radius of the maximum velocity will give the eccentricity of mass flow.

how can i calculate centre of mass flow?

Regards Rajesh

 All times are GMT -4. The time now is 01:28.