|
[Sponsors] |
Software for exprting file in STAR-CD format ??? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 9, 2006, 09:42 |
Software for exprting file in STAR-CD format ???
|
#1 |
Guest
Posts: n/a
|
Its Urgent. Can anybody help me in finding, from which software we can output the data in STAR-CD format? Is Hypermesh or Ideas used for this?
|
|
May 10, 2006, 09:05 |
Re: Software for exprting file in STAR-CD format ?
|
#2 |
Guest
Posts: n/a
|
If I understood you correctly, you want to transfer solid model into Star-CD, right? Then you can make solid model in any 3D modeling software like CATIA, UNIGRAPHICS, SolidWorks, SolidEdge, etc. Then save your model as IGES format, if you are using Star-CD 3.22 or Star-CD 3.24 in the Star-Launch you select pro-Star/Surf, you transport your solid model into that and generate a surface of your model, then you go to pro-Star/amm and transfer your generated surface into pro-Star/amm, you can find an option AutoMesh just select it and follow the steps it shows you.
Regards |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Software for exprting file in STAR-CD format ??? | Atul | Siemens | 4 | May 10, 2006 15:05 |
Mesh file format for Star-CCM+ | Meredith | Siemens | 2 | August 7, 2005 16:52 |
File Injection file format | Pravir | FLUENT | 0 | February 7, 2003 16:04 |
.geom file format in STAR-CD | sachin pande | Siemens | 2 | June 13, 2002 09:17 |
star-cd format | george pitts | Siemens | 2 | June 8, 2000 13:54 |