CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   Bluff Body (https://www.cfd-online.com/Forums/siemens/55567-bluff-body.html)

krithiga August 18, 2006 13:25

Bluff Body
 
How can a mesh be generated in Pro Star for a flow taking place through a pipe with a cylindrical bluff body placed near the exit? Will deleting the cells corresponding to the bluff body location take care of flow separation?

Ben August 18, 2006 17:35

Re: Bluff Body
 
it depends on how complex the body is, if it is a regular shape then you should be able to use vc3d but if its a bit more complex you might have to use block structured or even automeshing. Whether it captures flow separation depends on the resolution in the relevent regions.

mahesh September 16, 2006 07:45

Re: Bluff Body *NM*
 

santosh November 4, 2006 14:36

Re: Bluff Body *NM*
 

ismail November 7, 2006 16:45

Re: Bluff Body
 
i need any information about bluff body burner designe


All times are GMT -4. The time now is 21:33.