|
[Sponsors] |
September 9, 2006, 09:14 |
cyclic B.C. in Star-LT
|
#1 |
Guest
Posts: n/a
|
Hi, is there anyone using the Star-LT?
It's very handful for most cases. But I got problems in cyclic B.C. setting. And none of the tutorials showing the example. Anyone has examples with cyclic B.C. (in .mdl or .mon file)? Thanks! |
|
September 19, 2006, 20:39 |
Re: cyclic B.C. in Star-LT
|
#2 |
Guest
Posts: n/a
|
I think that the match of artriby mesh surface seem hard to build.
I think that this problem is not the due to STAR-LT. You can creat a cubic and genetate a hex mesh. And make cyclic patch with +x and -x surface. In my experience it work. |
|
September 22, 2006, 11:02 |
Re: cyclic B.C. in Star-LT
|
#3 |
Guest
Posts: n/a
|
Dear Tomosada san, Thanks for response. Yes, it worked on cubic. And it worked for cylinder(one third in thida direction) as well.
But when the rotating frame is applied, it didn't work anymore. Any comment? Hans |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cyclic specification | boger | OpenFOAM Running, Solving & CFD | 0 | February 8, 2009 15:17 |
Help!cyclic boundary | Bard | Siemens | 0 | December 16, 2006 07:41 |
cyclic conditions | Laurent FERRY | Siemens | 0 | January 6, 2006 16:11 |
Cyclic or Symplane? | Julie Polyakh | Siemens | 2 | December 12, 2001 05:27 |