CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

wedge cells pridicting high T-KE why?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 21, 2006, 15:12
Default wedge cells pridicting high T-KE why?
  #1
shan
Guest
 
Posts: n/a
Dear Friends,

I am running Afterburner combustion problem.Total cells size is 2 million with extended domain (followed by CD nozzle,mach 1.6 around) of ambience.I took 60 degree scetor and did the mesh on prostar block meshing.At the axis model has wedge cells and it creates convergence problem while running the analysis.High turbulent KE (1e+5) is pridicted exactly at wedge cells.mass and enthalpy convergence is very slow compared to momentom convergence.my question is,

1.How far wedge cell affects the mass and momenom convergence and final results like total pressure loss etc.?

Thanks in advance

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
High aspect ratio cells with checkmesh gian_ing OpenFOAM Running, Solving & CFD 5 December 2, 2008 10:45
[blockMesh] Arcs in wedge case sega OpenFOAM Meshing & Mesh Conversion 1 September 20, 2008 12:34
use of high aspect ratio cells near walls Usman FLUENT 0 January 23, 2008 08:16
hex cooper and hex wedge together is just? JHON FLUENT 0 October 28, 2006 01:18
supersonic wedge sarah Phoenics 1 May 2, 2003 11:24


All times are GMT -4. The time now is 15:57.