CFD Online Discussion Forums

CFD Online Discussion Forums (
-   Siemens (
-   -   segmentation fault again (

KtoTo October 27, 2006 07:15

segmentation fault again
Excuse me for this trouble was discusssed but i didn't find needed answer (it may well be that it has been taken earlier). So, when I check one of the models (button "check all"), the error occures:

RUNNING CASENAME: amkza1 /usr/local/bin/prostar: line 99: 5230 Segmentation fault ${STARDIR}/bin/pro-${PRODR} ${CMAP} ${BATCH} ${EZTOOL} I think, this problem is extended enouph. If anybody faced with this problem or like this, please, write, what you did to solve it.

StarSuperUser October 27, 2006 16:40

Re: segmentation fault again

that is adapco programing

switch to another cfd code and you can work

Paddy October 27, 2006 17:01

Re: segmentation fault again
or switch to Unix/Linux

Ben October 28, 2006 04:08

Re: segmentation fault again
or use star-ccm+

Dave Letterman. October 28, 2006 11:22

Re: segmentation fault again
you can ask them:



DB October 29, 2006 21:48

Re: segmentation fault again

Can you give some more detail like which software version you are using and which are you using some user programming some detail about the numerical problem that you are trying to model solver features used and BC applied.Then I can try to figure out the problem


KtoTo October 31, 2006 03:38

Re: segmentation fault again
Hi, thanks for all answers. I use star-cd v. 3.150 (i used command ./PRO_VERSION -v for this). I obtained the mesh (about 1.400.000 cells) in pro*am from nastran file and checked it. I didn't define boundares, physical properties e.t.c. (i.e., i kept all default values).


Ben October 31, 2006 07:34

Re: segmentation fault again
Oh my god, try using a newer version, that one was written before time began

KtoTo November 3, 2006 10:25

Re: segmentation fault again
:)))) Ok...We shall many work to earn many money....) thanks

All times are GMT -4. The time now is 06:43.