CFD Online Discussion Forums

CFD Online Discussion Forums (
-   Siemens (
-   -   esice problem (

philip November 10, 2006 04:11

esice problem
Hi everyone, I'm trying to simulate a GDI engine. I'm working on a linux SUSE OS machine with ES-ICE 2.02.000 and STAR 3.26. A first analysis without gasoline injection was carried out and everything was ok until the end of the simulation. Now I'm trying to realize the simulation with injection but calculation stops without apparently reason .Moreover it seems to be a ICE comunication problem because STAR does not fall down, no warning inside the file info,but the simulation remains at that angle without going on and the processor is still be busy. Do you have an idea to solve this problem? Thanks

Cheerio November 11, 2006 15:17

Re: esice problem
run your process with the option -debug

star -dp -mpi=mpich -nolookahead -nooverload -debug

philip November 13, 2006 02:58

Re: esice problem
Thanks for your answer but unfortunately it did't work and with the debug option I don't have any new information about the problem. Do you have any other idea? Thanks again philip

All times are GMT -4. The time now is 00:32.