CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

ANYBODY works with ES-sofc?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 24, 2006, 03:04
Default ANYBODY works with ES-sofc?
  #1
josh
Guest
 
Posts: n/a
Hello, this is josh..

Trying to work with customized gird with ES-sofc.

But I can't make the grid fit with es-sofc.

anybody works with es-sofc can help me with making the grid.

If there is, it would be a pleasure.

Thank you

  Reply With Quote

Old   November 24, 2006, 18:01
Default Re: ANYBODY works with ES-sofc?
  #2
notdiscl
Guest
 
Posts: n/a
for fuel cells simulation it is better to upgrade to star-ccm+, you can build your fuel cell geometry and model easily in star-design and then define reactions, source terms, porous medium, etc...You are using a methodology a bit too old. Ask your support how to download and install stardesign with starccm+. It uses the same license than star-cd.Good luck.
  Reply With Quote

Old   November 25, 2006, 02:55
Default Re: ANYBODY works with ES-sofc? *NM*
  #3
josh
Guest
 
Posts: n/a
  Reply With Quote

Old   November 25, 2006, 02:59
Default Re: ANYBODY works with ES-sofc?
  #4
josh
Guest
 
Posts: n/a
Thank you very much.!! I will try star-ccm+
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
es-sofc josh Siemens 2 December 5, 2006 07:26
SOFC Sebastian FLUENT 0 June 21, 2006 04:25
SOFC garyhayes FLUENT 0 January 30, 2004 12:00
SOFC garyhayes FLUENT 0 January 30, 2004 11:59


All times are GMT -4. The time now is 09:39.