Import in to starccm+
Hai, we have problem of importing geometry in to starccm+.How can we export from pro-star,pro-amm in to starccm+?we have tried .pat,.nas,.dbs extension files but the geometry cannot be displayed.
Thanks in advance, Prakash |
Re: Import in to starccm+
Dear Vidyaprakash. While importing surface, please make sure that "open geometry scene after import" is clicked On. Otherwise after importing surface you can go in "scenes" and double click "Geometry scene". For .dbs file,make sure that same database ID is specified in which you saved the meshed surface in pro-amm.
|
Re: Import in to starccm+
pat,nas and dbs files can only be used for surface mesh import if you want to move a volume mesh across your best bet is to either write a ngeom file (in 3.26) or a ccm file (in 4.0x).
|
Re: Import in to starccm+
Thanks ben In starv3.26 can you just tell me the procedure how to write ngeom.file. Thanks, Prakash
|
Re: Import in to starccm+
Thanks Mr.vishal I have problem in writing ngeom.file.can you just tell me the procedure. Thanks Prakash
|
Re: Import in to starccm+
Just type the command "ngeom"
|
Re: Import in to starccm+
Thanks william blake i did it Prakash
|
All times are GMT -4. The time now is 20:43. |