CFD Online Discussion Forums

CFD Online Discussion Forums (
-   Siemens (
-   -   warning in file (

george January 16, 2007 04:23

warning in file
Hello to everybody,

At the end of a run there is a warning in file *** WARNING #090 *** VALUE ELOG*YPLUS OR ELOG*EFFVIS/(CAPPA*VISCOS) IS LESS THAN 1.1 AT 30920 CELLS. UPLUS=YPLUS LAW IS USED. IF THIS SITUATION PERSISTS, INCORRECT RESULTS MAY BE OBTAINED. Do you know how can I correct this? Thank you


bobo March 14, 2007 07:48

Re: warning in file
I also encountered the same problems, but it appeared at the beginning of the .info file. In my case, I applied the two-layer wall function model. How about your case?

George March 19, 2007 09:16

Re: warning in file
I applied standard wall functions. Do you know how can we treat the problem?

bobo March 19, 2007 10:48

Re: warning in file
it appears that the height of that cell is too small, which lies in the inner sublayer layer. So, at first, increase height of the first cell near the wall.

George March 20, 2007 04:32

Re: warning in file
Thank you very much I will compute y+ and I will increase the height of the first cell above y+.

All times are GMT -4. The time now is 20:08.