CFD Online Logo CFD Online URL
Home > Forums > Siemens

volume mesh with hypermesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 18, 2007, 09:18
Default volume mesh with hypermesh
Posts: n/a
Hi guys, has anyone ever make a volume mesh with hypermesh for pro-star? What about it compared with pro-amm?

  Reply With Quote

Old   March 22, 2007, 09:41
Default Re: volume mesh with hypermesh
manoj pal
Posts: n/a
hi!!!!!!!!!!!!!!! i am a mechanical student, doing my prroject in dynamic analysis of sloshing in tank can any body guide me how to apply loads when tank is in dynamic condition , or if any body having any tutorials then forword me ..................plzzzzzz
  Reply With Quote

Old   April 4, 2007, 18:11
Default Re: volume mesh with hypermesh
Posts: n/a
It depends on the element Type. Only tets are Ok. Structured Hex is a pain unstructured Hex + wedges is OK. Polys and trimmed are a no go

And I forgot, the CFD-Mesh from HM 7.0 is also a pain, which means, that you can't create no good boundary layer with HM 7.0

HM 8.0 is much better, but it's beyond my experience.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
mesh algo for volume mesh in star ccm rohit Siemens 1 August 8, 2008 20:44
Exporting mesh from FLUENT to HYPERMESH or LS-DYNA Subramani Sockalingam Main CFD Forum 3 February 19, 2008 08:34
Exporting mesh from FLUENT to HYPERMESH or LS-DYNA Subramani Sockalingam FLUENT 1 February 4, 2008 05:27
Imprting HYPERMESH Mesh file in Gambit Atul T. Shinde FLUENT 1 December 31, 2002 12:39
Importing mesh into Gambit from Hypermesh vaddiraju FLUENT 0 August 23, 2002 11:50

All times are GMT -4. The time now is 15:07.