CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

es-tools in Star-CD release 4

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 19, 2007, 07:25
Default es-tools in Star-CD release 4
  #1
David Baker
Guest
 
Posts: n/a
It seems there are not es-tools in release 4 (especially as-aero). Is it right?

If No, how should I run es-aero in release 4?

I mean, what is the command for running es-tools?

Thanks,
  Reply With Quote

Old   February 19, 2007, 14:45
Default Re: es-tools in Star-CD release 4
  #2
A good advice from Donald
Guest
 
Posts: n/a
I guess your account manager did not explain you what to do.

There is no benefit yet to upgrade from v3.2 to v4 for most es-tool. Especially es-aero and even with polymeshes.

Most of the surfaces imported in es-aero can be imported in star-ccm+. By saving with the command 'ngeom' instead of 'geom', you can read import .ngeom es-aero mesh into star-ccm+

So here is the best plan:

- remain with v3.26 for the moment - start getting trained in star-ccm+ (integrated meshing, surface wrapper, coupled solver,post-processing, macros...) - es-aero is planned to be transfered to star-ccm+ - transfer directly from v3.26 to star-ccm+ when confident

Donald

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Star next release tootoon Siemens 4 October 27, 2005 02:40


All times are GMT -4. The time now is 06:43.