CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Weller 3 Equation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 1, 2007, 02:52
Default Weller 3 Equation
  #1
Kuriokose
Guest
 
Posts: n/a
I am simulating GDI spray combustion using weller 3 equation model. My fuel injection starts at 90 degree after TDC. I set the combustion model and got the following scalars: C8H18, O2,CO2,H2O,N2,RVB,WRINKLE,MIXTURE FRACTION and N0. When I switched on the chemical scheme prostar automatically set the values of RVB=1 and WRINKLE=1. Hence I initialised the other scalars o2 as 0.233 and N2 as 0.767 (No EGR). Boundary also I initialisesd with the same concentration of O2 and N2. The problem I am facing is once the fuel injection starts The engine output file(*.spd01) shows some values of burned scalar C8H18( which should occur near TDC) . It also shows some values of CO2 and H2O. This happens immediately after the start of fuel injection (90 degree after TDC). The evaporated scalar 1 (i.e C8H18) also show some unrealistic value of the order od 0.92314E+34).

The above mentioned phenomena doesnot occur when I switched off the chemical scheme( which ofcourse has no meaning for combustion simulation)

Please help me in this regard. Thanks in Advance

Bye Kuri
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Where to find the theory for weller flamet combustion model 21kalee OpenFOAM Running, Solving & CFD 7 December 19, 2012 18:18
Combustion in ICE - Weller model roadracer Siemens 1 July 22, 2009 05:54
weller+problem Kuriakose Siemens 0 March 12, 2007 05:34
Weller combustion model roadracer Siemens 0 October 6, 2003 06:07
combuston in ICE Weller model II roadracer Siemens 0 September 3, 2003 13:28


All times are GMT -4. The time now is 08:36.