CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Save User Data

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 9, 2007, 05:49
Default Save User Data
  #1
Ale
Guest
 
Posts: n/a
Hi,

I have a problem when saving user data with StarCD 3.26.

I defined a cell set containing 10800 cells (that's what it is found using the Cell List or Cell Check commands in the Cell Tool utility). If I try to save to file data for this cell set (using Post > Save User Data), the resulting file contains only 10752 cells!

Where are the other 48 gone? Where could the problem be?

Thank you very much in advance,

Ale
  Reply With Quote

Old   March 9, 2007, 09:05
Default Re: Save User Data
  #2
UncleSam
Guest
 
Posts: n/a
check to see if any cells in that cset are not fluid (ie baffles, shells, or solid cells). It won't write data for those.
  Reply With Quote

Old   March 9, 2007, 11:33
Default Re: Save User Data
  #3
Ale
Guest
 
Posts: n/a
Thank you for your reply.

However, I defined the cell set using the command 'cset' (cset news type table#), and I loaded only one fluid cell table. Also the command 'count cells' confirms that there are 10800 fluid cells in the set, but in the file I get only 10752 cells... I still don't understand this.

Thanks a lot anyway.

Regards,

Ale

  Reply With Quote

Old   March 9, 2007, 12:20
Default Re: Save User Data
  #4
Nahum
Guest
 
Posts: n/a
try to type:

close all

other:

close filename.usr

  Reply With Quote

Old   March 12, 2007, 11:33
Default Re: Save User Data
  #5
Ale
Guest
 
Posts: n/a
Thank you, Nahum.

I tried this with no success. I tried to close all files (but then I must reopen the pst file) and to close the usr file, but the issue still happens (even if the generation of the user data file is the first thing I do after opening the mdl file and loading the pst file).

I will keep on looking for the origin of this problem. Thank you anyway for your support,

Ale

  Reply With Quote

Old   March 16, 2007, 06:05
Default Re: Save User Data
  #6
Ale
Guest
 
Posts: n/a
Hi, I have found that the number of cells saved in the file is always a multiple of 256: it is the largest multiple of 256 lower than the number of cells in the set.

Any clue?

Thanks,

Ale
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[OpenFOAM] How to save data sunnysun ParaView 9 March 3, 2009 13:34
how to save case data and data during iteration? JOHN FLUENT 3 October 10, 2006 20:40
[OpenFOAM] How to save the postprocessing data dbxmcf ParaView 1 August 29, 2005 07:29
save data file UDF lichun Dong FLUENT 0 August 18, 2005 18:47
Save data massimo Siemens 0 November 18, 2002 06:35


All times are GMT -4. The time now is 18:21.