CFD Online Logo CFD Online URL
Home > Forums > Siemens

Monitoring data at a point within CFD domain.

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 17, 2007, 14:46
Default Monitoring data at a point within CFD domain.
Posts: n/a
Sponsored Links
Hi, I would like to know how to monitor the unsteady pressure at a point between the inlet and outlet boundaries within my region (I am using Star-CCM+).

Ive tried placing a point (from the derived parts menu) and then running a report using the point defined as the part, but I get an error message.

Any suggestions and help will be much appriicated.

  Reply With Quote
Sponsored Links

Old   April 17, 2007, 15:02
Default Re: Monitoring data at a point within CFD domain.
Posts: n/a
create the point, use it in a maximum report then create a monitor and plot from it
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Monitoring a point in dynamic mesh Modisa FLUENT 1 December 19, 2008 04:04
monitoring fluctuations at a point ED FLUENT 2 February 24, 2007 05:05
monitoring fluctuations at a point ED Main CFD Forum 0 February 23, 2007 12:58
Saving data at a point in moving domain sawa FLUENT 0 February 19, 2006 10:31
How to get velocity data at some point in domain sawa FLUENT 3 February 28, 2005 07:03

Sponsored Links

All times are GMT -4. The time now is 23:38.