CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Velocity is correct but pressure is not right

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 30, 2007, 16:46
Default Velocity is correct but pressure is not right
  #1
shashank
Guest
 
Posts: n/a
Hi guys i ran an unsteady simulation on my artery problem with split flow boundary conditions, my velocity after running for 1 sec with a time step of 0.001 sec is exactly right but my pressure is way off, iam not sure what might be going wrong can some one help me.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Correct lift but wrong pressure drag - possible? zx Main CFD Forum 4 July 27, 2007 23:38
correct UDF code for unsteady pressure boundary James W FLUENT 0 November 2, 2005 11:38
velocity angle not calculated correct Christian FLUENT 0 January 7, 2004 11:07
Cannot set correct inlet velocity by UDF?!? Bob FLUENT 5 March 27, 2003 03:17
How to obtain correct viscous pressure drag using CFX? Ketut Utama Main CFD Forum 1 January 25, 1999 05:05


All times are GMT -4. The time now is 04:58.