CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

How to give restart option for transiant analysis

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 7, 2007, 05:12
Default How to give restart option for transiant analysis
  #1
Sangamesh
Guest
 
Posts: n/a
Thank you sir for giving reply

But in transiant analysis we can't give for analysis restart option according to me it is aplicable to only steady state.(as per given user gide )

If i am wrong can you tell me how to give it.

Thanking you.

  Reply With Quote

Old   May 7, 2007, 06:53
Default Re: How to give restart option for transiant analy
  #2
Ben
Guest
 
Posts: n/a
you can do a restart on transient same as on SS providing you have the pst file.
  Reply With Quote

Old   May 10, 2007, 21:45
Default Re: How to give restart option for transiant analy
  #3
azmir
Guest
 
Posts: n/a
Not that simple due to bugs. Sometimes even after setting it to read from restart file, it doesn't work properly. SO, instead I used the star -dp -restart command. And even this sometimes revealed irregularities for case of transient... depends on luck I suppose.
  Reply With Quote

Old   May 21, 2007, 04:24
Default Re: How to give restart option for transiant analy
  #4
Sanjay
Guest
 
Posts: n/a
As stated in the manual an initial field restart is not possible . However a standard restart is easily possible. If you get into errors in starting check whether you have applied the standard restart option before writing out the mdl file and problem file and then you need to restart the run.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
analysis restart for lagrangian multiphase mic Siemens 0 July 5, 2007 09:36
problem related to transiant analysis Sangamesh Siemens 3 May 7, 2007 05:09
restart analysis varun Siemens 1 April 23, 2005 00:00
Restart Analysis Bart Siemens 13 January 27, 2005 03:46
restart analysis subhash Siemens 2 September 5, 2002 04:03


All times are GMT -4. The time now is 12:27.