|
[Sponsors] |
IC engine Spray-EBU combustion model problems |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 14, 2007, 06:45 |
IC engine Spray-EBU combustion model problems
|
#1 |
Guest
Posts: n/a
|
I set up an IC engine combustion chamber model with a C12H26-L nozzel. The Spray works well. When I config the chemical-reaction model,Star-cd automatically creates scalars C12H26,mix,O2,N2,RAC-1,Rac-2,Rac-3 etc. The problem is Mix,Rac-1-2-3 do not appear in the combustion chamber,so the ignition do not run in the 50th step. I confirm that I have set these scalars as "Post",But I dont know why they do not come out in the chamber.
Could anybody help me? thanks a lot. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problems when I mesh my engine model. | deisler | Siemens | 3 | March 22, 2007 22:58 |
turbulence model in internal combustion engine | George | Main CFD Forum | 0 | December 4, 2006 19:01 |
diesel engine spray and combustion | usker | Siemens | 6 | April 24, 2006 23:36 |
Spray and combustion model for alternative fuel | Torn | Main CFD Forum | 3 | November 12, 2003 05:05 |
Using Fluent6.1 to model engine combustion | Allanhill | FLUENT | 1 | June 15, 2003 05:36 |