CFD Online Logo CFD Online URL
Home > Forums > Siemens

Problems of injection (multi injectors)

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 24, 2007, 06:34
Default Problems of injection (multi injectors)
Posts: n/a
Hi all, I was just doing a simple model of a cubic bomb with injection at multi-points.All together I set 4 injectors,each attached with its own cylindrical coordinate csystem and fuel rate table.But after the simulation,I found that injection was only calculated at injector #1,which I established first.All the other injectors seemed not activated. What's wrong with it? Many Thanks!
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
solving of multi phase problems using fluent satyanarayana FLUENT 3 November 20, 2009 17:37
Multi-fuels injection!! Please help me!! cecillia FLUENT 1 June 9, 2008 13:23
Problems about multi swirl tubes simulation using Jason FLUENT 4 May 9, 2008 00:33
Fuel Injection Problems..... Maria Siemens 1 August 25, 2007 09:02
DPM injection problems alex FLUENT 8 December 5, 2005 16:15

All times are GMT -4. The time now is 20:09.