CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Strarting load step number

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 5, 2007, 05:15
Default Strarting load step number
  #1
KtoTo
Guest
 
Posts: n/a
Hi, my next question is: i solve transient problem, and when solver ran (pmovlink, starlink etc), we have some information about problem in terminal window, in particular Starting Load Step Nuumber. Once this number became 2 (not 1). I don't know why. And now in Advanced Transient panel I need to define 2 load steps end set number of load steps for next analysis from 1 to 2 to solve transient problem. If anybobe knows, please say me how can I change this Starting Load Step Nuumber? Thanks. PS: I use STAR-CD V3.15 but I should be please for inormation about other version.
  Reply With Quote

Old   June 15, 2007, 17:43
Default Re: Strarting load step number
  #2
staruser
Guest
 
Posts: n/a
This might be an error in the old version of STAR-CD/pro-STAR you're using. Try a newer version and make sure the setting in the advanced transient panel is correct - i.e. starting load step. Why do you have to use advanced transient at all?
  Reply With Quote

Old   June 21, 2007, 10:01
Default Re: Strarting load step number
  #3
KtoTo
Guest
 
Posts: n/a
This is quite convenient ) The probleme was in STAR-CD on my machine: after STAR-CD runing, when button SAve in Advanced Transient panel firstly clicked, ramp/step was set up ramp from step automatically (I didn't pay attention on this) and solving started from second load step. This happens only on my PC. )) unique phenomenon.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
number of iterations per time step chouki FLUENT 1 August 13, 2013 01:11
SELECTING TIME STEP SIZE, NUMBER OF TIME STEP NITUL KALITA FLUENT 2 November 22, 2012 09:28
variable time step with max courant number lelia Siemens 1 October 3, 2008 01:46
udf - iteration number within one time step?! Mira FLUENT 1 January 23, 2008 04:16
starting load step number!!!??? KtoTo Siemens 0 April 4, 2007 06:44


All times are GMT -4. The time now is 02:13.