CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   adding a shell for sensor points (https://www.cfd-online.com/Forums/siemens/56249-adding-shell-sensor-points.html)

Kian August 21, 2007 18:20

adding a shell for sensor points
 
Hello,

I would like to have the pressure vs. time data from my transient simulation, only for 3 points in my domain, for example z=0.25 x,y=0. I am trying to do that via "monitor cell behavior" in star-guide, which needs a .set file. I figured out where to make that .set file. Also, it seems that I can add shells by clicking on cells or vertices in the cell tool, but I can't find anything asking for coordinates. Please let me know how can I achieve this.

Thanks,

Kian Mehravaran

Ralphie August 22, 2007 04:17

Re: adding a shell for sensor points
 
cset news gran

have a look in the commands manual.

Kian August 22, 2007 10:50

Re: adding a shell for sensor points
 
Hello Ralphie,

I see now that the way to go in star-cd is with the commands. I started only 2 days ago.

Thank you very much.

Kian

Ralphie August 22, 2007 12:06

Re: adding a shell for sensor points
 
Good luck. Starting into the world of Star-CD is quite a difficult task.



All times are GMT -4. The time now is 08:19.