CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Model conversion from StarCD to Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 20, 2007, 08:44
Default Model conversion from StarCD to Fluent
  #1
Ale
Guest
 
Posts: n/a
Dear all,

has anybody any experience in converting models from StarCD to Fluent or viceversa? Can ICEM-CFD be useful in this operation?

Any information or suggestion would be appreciated.

Thanks a lot

Ale

  Reply With Quote

Old   September 25, 2007, 11:06
Default Re: Model conversion from StarCD to Fluent
  #2
Reza
Guest
 
Posts: n/a
Hi Ale,

This should do the trick: Save your model data in coded format (file-->save as coded) ICEM should be able to read this file, then you can convert in any solver you like. I've done the same for CFX. If you have coupled cells there, you should define it new.

good luck, Reza

  Reply With Quote

Old   September 28, 2007, 23:07
Default Re: Model conversion from StarCD to Fluent
  #3
Kevin
Guest
 
Posts: n/a
From Prostar, you can save the model (fluid cells and shells) as an ICEM domain file (.uns). With this file, you can then load this straight into ICEM, and export to the solver of your choice. I suggest that you put shell on your couple match faces in Prostar, or use ICEM to find the uncovered faces so that you can define your Grid Interfaces inside Fluent.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Model Conversion from StarCD to Fluent Ale CFX 1 September 21, 2007 05:49
Model conversion from StarCD to Fluent Ale Main CFD Forum 1 September 20, 2007 08:51
Model conversion from StarCD to Fluent Ale FLUENT 0 September 20, 2007 08:43
Model conversion between codes Ale FLUENT 0 February 8, 2007 06:37
how to model gas to particle conversion in CFX thandavan CFX 3 June 19, 2006 11:13


All times are GMT -4. The time now is 06:01.