CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Exporting data with imported mesh node STARCCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 17, 2007, 05:07
Default Exporting data with imported mesh node STARCCM+
  #1
Antonio
Guest
 
Posts: n/a
Hi everyone,

I'm tryng to export the boundary Heat flux with the grid mesh information (cell number, node1 ,node2,..., Heat Flux).to give this input to NASTRAN.

but it seems that with STAR-CCM+ v2.06.008 is possible only to export (by TOOL/TABLE/XYZ Internal Table ) the centroid coordinates.

How I can make this data? Does anyone did this operation? Thank you Antonio
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] Problem in running mesh imported from fluent to foam vishal OpenFOAM Meshing & Mesh Conversion 2 February 6, 2009 11:05
SimpleFoam error with mesh imported from salome matteo OpenFOAM Running, Solving & CFD 9 January 2, 2008 05:04
exporting node coordintes from icem Virag Mishra CFX 4 October 8, 2007 12:45
How to find cell areas of imported mesh prakash FLUENT 0 February 8, 2006 03:03
define faces within GAMBIT in imported mesh Elmar FLUENT 0 February 25, 2001 08:10


All times are GMT -4. The time now is 11:52.