CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

heat transfer on panel radiator

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   November 30, 2007, 16:19
Default heat transfer on panel radiator
emir aydar
Posts: n/a
i will model L=400 mm PANEL FINNED FINNED PANEL panel radiator using starccm+, i sketched panel radiator i split out boundaries but how will i model outside air outside from finned and how will i give boundary conditions valuse for instance i will use fluid and air conductivity bu how will i give these values i mean can you guide me in turns about modelling first i split out boundaries then what will i do? which values will i use for boundary conditions and how will i decide setting up model?
  Reply With Quote

Old   December 11, 2007, 11:46
Default Re: heat transfer on panel radiator
Posts: n/a
sounds like you need to do a few STAR-Design and STAR-CCM+ tutorials and it will become clear - you are asking very basic questions!
  Reply With Quote

Old   December 15, 2007, 04:35
Default Re: heat transfer on panel radiator
emir aydar
Posts: n/a
i wrote my question extensively i gave my parameters
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
flow/heat transfer through heat sink (with fins)? Pei-Ying Hsieh Main CFD Forum 1 January 26, 2008 07:33
MODELLING PANEL RADIATOR IN STARCCM+ emir aydar Siemens 5 October 15, 2007 09:17
HEAT-TRANSFER & EXCHANGE HEAT MODEL Problems Jordi FLUENT 1 March 31, 2006 10:30
Vof, udf and mass transfer panel Jay FLUENT 1 March 15, 2005 01:29
Heat Transfer Coeff. at Heat Flux Boundary Rushyen CFX 6 January 18, 2001 06:09

All times are GMT -4. The time now is 22:40.