CFD Online Discussion Forums

CFD Online Discussion Forums (
-   Siemens (
-   -   Another breakup model (

Jay, Choi December 5, 2007 14:21

Another breakup model
As I know, there are only three types of breakup model in STAR-CD.(No user subroutine). So, is there any way to apply another breakup model,like WB model thru the user subroutine or any possible way?

Richard December 6, 2007 05:46

Re: Another breakup model
There is a user routine (DROBRK) but it doesn't allow the break-up to generate new parcels, only modify the droplet count.

Jay, Choi December 7, 2007 00:15

Re: Another breakup model
Thanks for your answer. Richard...

So, you mean I can use only 3 models for breakup and cannot use the other breakup model except those three in Star-CD, right?

Richard December 7, 2007 05:02

Re: Another breakup model
No, there is user coding (DROBRK) but it only allows you to specify d(diameter)/dt, it doesn't allow you to create new parcels, at least not officially or very easily. There are lots of break-up models which you could implement using this method, not just the three internal ones. But you couldn't implement all break-up in this way.

Andrea February 14, 2008 19:48

Re: Another breakup model
Well in Star-Cd you can use Reitz-Diwakar model, Hsiang-Faeth model and Pilch-Ederman model but you can also try the MPI-1 and MPI-2 models, wich seems to work well on Diesel Sprays...

Zaktatir January 13, 2010 14:36

hello, i am trying to model droplet separation in stratified flows (due to KH instability and capillary waves) are the break up model in star cd convenient for this or any other.. i am simulating with cfx...

All times are GMT -4. The time now is 10:47.