|
[Sponsors] |
Question about the resistance in fixed temperature |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 29, 2008, 00:00 |
Question about the resistance in fixed temperature
|
#1 |
Guest
Posts: n/a
|
Hi all
I have a question about the wall boundary and read the manual and it's not so clear. What's the real meaning about the resistance?? Does it simulate a layer of solid without creating actual solid grids? so the value based on the thickness and conductivity of the solid layer? or it simulates the fouling resistance and contact resistance? |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fixed Temperature in StarCCM+ | Oliver | Siemens | 4 | September 8, 2008 08:22 |
ask a question about Fixed Flux Boundary Condition | mahe | Phoenics | 1 | July 15, 2008 05:21 |
question about a temperature dependent HTC | Christoph Ley | Phoenics | 2 | June 5, 2008 10:05 |
Question on Face Temperature Gradient | Tomasz Didenko | FLUENT | 1 | June 27, 2003 05:30 |
question on cyclic B.C. for temperature | Jiaying Xu | Siemens | 1 | February 27, 2003 07:13 |