CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

Etablishing a blade locked measurement plane.

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 4, 2008, 02:18
Default Etablishing a blade locked measurement plane.
Posts: n/a
Dear Colleague, I am working with CCM+ using rotating coordinates and modelling a transient flow process with significant levels of turbulence and flow reversal. I seek to lock a measurement plane between two blades and to cause that plane to rotate with the blades as they move through one revolution. Through this approach I wish to compute the mass flow swallowed by the blade passage between these two blades as they pass through a zone of flow reversal etc. At the moment I can create the measurement plane and easily compute the mass flow but I cannot get the plane to move in synchronization with the blades.

Your assistance would be appreciated.

Cheers Bou
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
graphics window locked? edi FLUENT 3 April 1, 2016 06:04
Phase locked average in run time panara OpenFOAM 2 February 20, 2008 15:37
Turbo components order in Blade-to-Blade View Aladdin CFX 0 March 17, 2007 10:01
locked databases andrea Siemens 2 February 25, 2002 10:59
node-locked license file sean CFX 2 October 22, 2000 00:02

All times are GMT -4. The time now is 23:43.