CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Assigning Wall Roughness in STAR-CD

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 6, 2008, 04:05
Default Assigning Wall Roughness in STAR-CD
  #1
Sachin Patil
Guest
 
Posts: n/a
Hi ,

I am trying to assign roughness to no slip wall. I could see that there are three constants A , B and C which has by default values of 8.5, 0 and 1 respectively. Then user has to input efective wall roughness(y0) and displancement(D). I went through Manual. Then I did calculate thickness of laminar sublayer. The roughness I want to include corresponds to completely rough wall. My question is that while assigning copletely rough wall, shall I have to just input efective wall roughness (y0) and have to keep everything else (A,B,C and D) as it is ? is this correct what I understood from Manual and reference for wall roughness. Thanks in advance. Thank you for your time and consideration.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wall Roughness LKF FloEFD, FloWorks & FloTHERM 5 May 8, 2008 11:22
Assigning Wall Roughness in STAR-CD Sachin Siemens 1 March 11, 2008 12:24
Wall Roughness Rex FLUENT 0 February 5, 2002 11:54
wall roughness merac Main CFD Forum 2 June 14, 2001 20:48
How can I set wall roughness? Ellen FLUENT 5 February 27, 2001 23:13


All times are GMT -4. The time now is 01:40.