 |
 |
 |
|
|
|
[Sponsors] | ||||
March 7, 2008, 02:28
|
EGR
|
#1 |
|
Guest
Posts: n/a
|
How to introduce EGR in diesel combustion simulation using STARCD-3.26
|
|
|
||
|
March 7, 2008, 15:46
|
Re: EGR
|
#2 |
|
Guest
Posts: n/a
|
Add active scalars for your EGR constituents. Initialize these with the correct mass fraction then track and update them as appropriate.
|
|
|
|
||
|
March 7, 2008, 20:12
|
Re: EGR
|
#3 |
|
Guest
Posts: n/a
|
It depends also on the combustion model used...what are you using?
|
|
|
|
||
|
March 8, 2008, 01:34
|
Re: EGR
|
#4 |
|
Guest
Posts: n/a
|
i am using EBU-LATCT combustion model
|
|
|
|
||
|
March 8, 2008, 07:49
|
Re: EGR
|
#5 |
|
Guest
Posts: n/a
|
search Star-CD forum, you can find all the information relevant to your question.
|
|
|
|
||
|
March 9, 2008, 20:43
|
Re: EGR
|
#6 |
|
Guest
Posts: n/a
|
Dear Ankur
with the EBU Latct model you need to assign specific scalar for the EGR simulation. Thay are: 18 - EGR CO2 19 - EGR H20 20 - EGR N2 Proceed with this metodology: define *set O2 0.23300 *set EO2 0.0 *set EN2 0.13775 *set ECO2 0.03661 *set EH2O 0.01712 and then iniscalar,18,stan,ECO2,1 iniscalar,19,stan,EH2O,1 iniscalar,20,stan,EN2,1 Regards |
|
|
|
||
|
March 9, 2008, 23:45
|
Re: EGR
|
#7 |
|
Guest
Posts: n/a
|
Thank you
|
|
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
