CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   Miture fraction (https://www.cfd-online.com/Forums/siemens/56505-miture-fraction.html)

 Subramani March 10, 2008 00:55

Miture fraction

What is mixture fraction in star guide panel?(carburated engine gasoline combustion)

 Parthiban March 10, 2008 02:27

Re: Miture fraction

Hi,

Are you running the combustion with es-ice model or you have modelled in prostar.

If in prostar

Initial mixture fraction will be Zero for all the species.

If you know the mass fraction of the individual species you can initialise it addional scalars- initialisation.

If in es-ice

All the species will be initialised to the stoichiometric combustion.

I think i have answered your question if not clear mail me

 subramani March 10, 2008 11:04

Re: Miture fraction

I am using prostar. carburated SI engine(Gasoline) simulation. I am Simulating compression ,combustion ,and expansion only. What is the value i need to specify for mixture fraction?

 subramani March 10, 2008 11:06

Mixture fraction

I am using prostar. carburated SI engine(Gasoline) simulation. I am Simulating compression ,combustion ,and expansion only. What is the value i need to specify for mixture fraction?

 matej March 12, 2008 08:02

Re: Mixture fraction

you may try to have a look at: http://www.cfd-online.com/Wiki/Mixture_fraction for the definition of mixture fraction.

You should understand such a basic term before you start to model any combustion. try to have look around if you can have a look into books like: http://www.cfd-online.com/Books/show...hp?book_id=273

or: http://www.amazon.com/Combustion-Fun...5323235&sr=8-1

or: http://www.amazon.com/Introduction-C...ref=pd_sim_b_5

or any other book on combustion.

 All times are GMT -4. The time now is 00:46.