CFD Online Logo CFD Online URL
Home > Forums > Siemens

Couple problem

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 25, 2008, 01:55
Default Couple problem
Posts: n/a
Dear Experts,

I try to create a couple in the mesh. For flat plane to flat plane it is not a problem, but for round plane to round plane it cannot joint. I try to increase the tolerance but it seem not working. Please help me to solve this problems

  Reply With Quote

Old   June 25, 2008, 21:36
Default Re: Couple problem
Posts: n/a
you can project vertices of one side plane to the other plane by using command 'vpro'. Maybe this measure can solve your problem!
  Reply With Quote

Old   June 26, 2008, 08:10
Default Re: Couple problem
Posts: n/a
Hi Mac,

Thank you for your information, I succeded to couple it using the Vpro...

Thanks a lot SAKTI
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
To 'couple' or not to 'couple'...) Freeman FLUENT 0 March 5, 2009 12:29
Couple c0384 Siemens 1 December 6, 2007 16:00
COUPLE ERROR star Siemens 3 May 17, 2007 05:19
Couple error Yehia Siemens 3 January 25, 2007 04:58
ud with recuperer couple hamina FLUENT 0 February 28, 2006 06:37

All times are GMT -4. The time now is 03:31.