CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Siemens

problem with export ccm from starccm+

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   July 22, 2008, 05:06
Default problem with export ccm from starccm+
Posts: n/a
Hi all,

I had exported a volume mesh from starccm+ (v3.02) using file > export > files of type: ccm, the ccm file ist large, so i thought it must contain all the volume mesh. then i read the ccm file using rccm into proam (V4.02) but could only see the surface mesh (shell) by putting the whole into small parts of csets, can any expert tell me why this happens and how to get the real volume mesh?

  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Export problem Francesco - University of Florence, Italy CFX 0 April 22, 2008 13:53
Grafic Problem with StarCCM+ Emiliano Binotti Siemens 3 October 25, 2007 16:36
problem about export data Rui Siemens 2 January 18, 2007 22:16
simple export problem Steven CFX 3 October 14, 2006 03:25
GAMBIT grid export problem Alex Yang FLUENT 2 April 23, 2001 04:08

All times are GMT -4. The time now is 19:12.