CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

Importing Star-CCM+´s .ccm file in Star-CD

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 20, 2008, 11:19
Default Importing Star-CCM+´s .ccm file in Star-CD
  #1
Zolet
Guest
 
Posts: n/a
Hi

I have my postprocessed simulation (a geometry scene in star ccm+ 3.02 with lots of streamlines) and I would like to create a .scn file.

I think I have to export my simulation from star ccm+ in the .ccm format, and import it in Star-CD then follow the simple instructions that I´ve read here: http://www.cd-adapco.com/press_room/...4/Dr_mesh.html.

The problem is I´m only a Star CCM+ user...

If anyone could help me with this:

1. What is glm mode? How can I set it up? 2. How do I do to import the .ccm file in star-CD (v4.02)??

Thank you in advance

Zolet
  Reply With Quote

Old   November 21, 2008, 08:14
Default Re: Importing Star-CCM+´s .ccm file in Star-CD
  #2
James
Guest
 
Posts: n/a
Glm is a display mode of Prostar. It uses GL as its basis and allows you to use hardware accelerated graphics.

You start it using

prostar glm

in Unix or you can select it in Windows.

To benefit from the hardware acceleration you need to either issue the

TERM command with the extended option

or click on the X/GL button on the lower left side of the output window - which performs the same function.

To read a CCM file exported from CCM+ in Prostar you use the

RCCM command.
  Reply With Quote

Old   November 21, 2008, 15:31
Default Re: Importing Star-CCM+´s .ccm file in Star-CD
  #3
Zolet
Guest
 
Posts: n/a
Hi

Thank you James for the answers. I did this (I´m using Windows):

I opened Star-Launch and changed in the file->preferences->pre-post graphics mode from XM to OpenGL (is this a correct step?) then I used the command RCCM to read the file.

I´m getting this error message:

Xlib: extension "GLX" missing on display "HICKMANN:0.0". Xlib: extension "GLX" missing on display "HICKMANN:0.0". The OpenGL version can not run on this display, disabling extended mode Cannot find appropriate OpenGL visual Xlib: extension "GLX" missing on display "HICKMANN:0.0". Xlib: extension "GLX" missing on display "HICKMANN:0.0". The OpenGL version can not run on this display, disabling extended mode Cannot find appropriate OpenGL visual

Then I tried TERM EXTENDED and got this:

**ERROR - EXTENDED MODE NOT SUPPORTED BY X VERSION. PLOTS SENT TO TERMINAL WITH MODE=STANDAR TYPE=EXTE RASTER STYLE DEVICE ASSUMED

Then i tried RCCM filename and Star CD read the .ccm file, but nothing appers in the pro-Star window but a black screen...

Can anybody help me?
  Reply With Quote

Old   November 24, 2008, 11:51
Default Re: Importing Star-CCM+´s .ccm file in Star-CD
  #4
James
Guest
 
Posts: n/a
I would ask CDA about the GL problem.

It will not plot unless you tell it to (as is always the case in Prostar).

Cset news fluid cplot

Should put up a plot on the screen.

To do much more you will need to learn at least some of the prostar plot commands.
  Reply With Quote

Old   November 25, 2008, 19:30
Default Re: Importing Star-CCM+´s .ccm file in Star-CD
  #5
ping
Guest
 
Posts: n/a
don't forget you can use provis to post-process .ccm files too - much easier to learn and use than pro-STAR, but with less features, however it certainly creates good .scn files (I notice it was used in that Dr Mesh article too)

But scene file creation relies on GL being available (either in software or hardware), so pro-vis much fail too, but it is more modern software created in QT so you might be lucky.

  Reply With Quote

Old   November 25, 2008, 19:55
Default Re: Importing Star-CCM+´s .ccm file - use provis
  #6
ping
Guest
 
Posts: n/a
PS I am not aware that you can read the result part of .ccm files into pro-STAR - command RCCM only reads geometry. So provis is your only easy option.
  Reply With Quote

Old   November 26, 2008, 10:32
Default Re: Importing Star-CCM+´s .ccm file - use provis
  #7
TG
Guest
 
Posts: n/a
You can read both geometry and results for STAR-CCM+ .ccm files into pro-STAR. provis is certainly easier, but either one will work and pro-STAR has more capability.
  Reply With Quote

Old   November 26, 2008, 13:57
Default Re: Importing Star-CCM+´s .ccm file - use provis
  #8
Balduin Bankerotti
Guest
 
Posts: n/a
You can read the results from ccm+ into prostar for postprocessing.

"load file.ccm ,, default"

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Importing Sphere from STAR-CD Sachin Siemens 12 April 29, 2008 17:59
ploblem with importing CAD file into Star-Design caoll Siemens 0 March 17, 2008 20:00
Cracks - importing a Mesh into Star-CD from CCM+ mk_mat Siemens 5 December 1, 2007 17:07
Errors importing Gambit .neu files to Star v3.15 Cb Siemens 1 November 29, 2004 12:39


All times are GMT -4. The time now is 06:35.