CFD Online Logo CFD Online URL
Home > Forums > Siemens

Help needed

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 7, 2009, 10:43
Default Help needed
Waseem Siddique
Posts: n/a
Hello I am modeling a U bend channel in STAR CCM+. I want to get the Temperature and velocity scales as output from the channel in form of a tabulated data or plot. I want to use it as input profile to the other channel. Can anyone help me how to do it??. Regards Waseem

  Reply With Quote

Old   January 7, 2009, 13:40
Default Re: Help needed
Posts: n/a
Under Tools > Tables, create a new XYZ internal table. Add your outlet boundary under parts, then add the scalar's you want. Right click, and export to a .csv file.

Next open the new model, create a new table from file. Then you can define whatever parameters you want based on the table. This is assuming that the outlet from the original and the inlet from the new are in the same XYZ location. If not, transform the new mesh to make the locations match.
  Reply With Quote

Old   January 7, 2009, 13:44
Default Re: Help needed
Waseem Siddique
Posts: n/a
thanks alot....this is of great help. Can I conyact you directly in near future? Regards Waseem
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help Needed S FLUENT 5 April 22, 2008 12:58
Help Needed Saravanan FLUENT 1 April 12, 2008 20:14
Help Needed Saravanan FLUENT 0 April 3, 2008 16:07
help needed vivek FLUENT 1 November 15, 2006 05:28
Help needed with UDF sam FLUENT 5 October 26, 2005 02:48

All times are GMT -4. The time now is 12:38.