|
[Sponsors] |
January 14, 2009, 08:59 |
Please Help Me
|
#1 |
Guest
Posts: n/a
|
Hello I am modeling a smooth straight channel in Star CCM+. I want to find out the average Nusslt Number on different walls of the channel like side ad bottom walls. Also How can I find the total average Nusslt Number of the channel flow? Reply will be appriciated. Regards Waseem
|
|
January 15, 2009, 02:19 |
Re: Please Help Me
|
#2 |
Guest
Posts: n/a
|
check out this http://www.adapco-online.com/adapco_...frontpage.html
|
|
January 15, 2009, 11:07 |
Re: Please Help Me
|
#3 |
Guest
Posts: n/a
|
Its a fully loaded website with a lot of info..... can you please specify the related artical?? Thanks
|
|
January 15, 2009, 20:33 |
Re: Please Help Me
|
#4 |
Guest
Posts: n/a
|
1. Create area averaged report(s) of heat transfer coef field function on the surface(s)
2. Create new field function(s) called Nusselt # and define is as per its formula using the field function(s) created by the above report(s), fluid conductivity and char. length 3. Create new 'max' report with N# as the field function and run this report. |
|
January 15, 2009, 22:18 |
Re: Please Help Me
|
#5 |
Guest
Posts: n/a
|
http://www.adapco-online.com/adapco_...frontpage.html ->Dr.Post->Calculating->Calculation of Nusselt Number
|
|
January 16, 2009, 08:20 |
Re: Please Help Me
|
#6 |
Guest
Posts: n/a
|
Ping This was very helpful: In CCM+ there is a field fucntion of Nusttle number. Averaging it directly would give the same result, I assume. Waseem
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|