CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Siemens (https://www.cfd-online.com/Forums/siemens/)
-   -   Gasoline Spray Modeling (https://www.cfd-online.com/Forums/siemens/56963-gasoline-spray-modeling.html)

sekkizhar January 22, 2009 07:44

Gasoline Spray Modeling
 
Hello,

I am working on gasoline spray in a spray bomb. Single hole nozzle. Has anyone come across prescribed models for gasoline spray? Does anyone have experimental data regarding any injectors?

Thanks in advance.

Sekkizhar

Andrea January 23, 2009 08:22

Re: Gasoline Spray Modeling
 
Hi, there's is some data on injectors (also gasoline ones) in SAE papers, like typical discharge coeff, cone angle, penetration, etc... I've worked on diesel injector but when I was looking for data I found something about gasoline. I don't have that data with me, but if you try a search on SAE publications maybe you'll find something useful
Regards
Andrea

sekkizhar January 23, 2009 13:24

Re: Gasoline Spray Modeling
 
Thanks for your reply. I have experimental values with me now. There are models specified for diesel spray, but have you come across what models are recommended for gasoline spray?

Regards, Sekkizhar

AoJie January 23, 2017 02:55

Up ? :)

I'm also modeling a spray bomb injection, and I'm looking for some advice

Best,

ashokac7 May 31, 2017 10:23

You can do it in CCM. But you have to extract boundary conditions from some research paper.

Sent from my Redmi Note 3 using CFD Online Forum mobile app


All times are GMT -4. The time now is 04:28.