CFD Online Logo CFD Online URL
Home > Forums > Siemens

export only a part of the flow

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 7, 2009, 12:31
Default export only a part of the flow
Posts: n/a
Hi everybody, I'd like to know if it is possible to export only a subzone of a result file to reduce its size. For instance, inside a brick or a cylinder. So far, I'm exporting a complete tecplot binary file that I then cut to only export the zone of interest, but if there is a better way to do it, I'd be really interested. My mesh is quite simple, so there are control volume shapes but no regions. Best regards julien
  Reply With Quote

Old   March 7, 2009, 12:32
Default Re: export only a part of the flow
Posts: n/a
I forgot, I'm using starccm+ 3.06
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Advection part.... Sas Main CFD Forum 0 June 15, 2007 15:46
PhD in China (part 2) Rui Main CFD Forum 9 June 9, 2007 08:40
How to export Pro/E 2001 Part drawings to Gambit Imran Shaban Bhatti FLUENT 2 March 27, 2006 19:33
how to see 8.part file li FLUENT 2 May 30, 2005 20:28

All times are GMT -4. The time now is 15:06.