hypermesh to star cd
 

hello
i got a problem when i try to send a mesh from hypermesh v10 to star cd 4.06, the star cd can read the mesh number and nodes but i can see that on the screen and also i can see the boundarys.... is anybody using hypermesh for star cd???? thanks

Your question makes no sense. Can you provide a better statement of your problem?

I use HM v10 & Star 4.10. I export a NASTRAN formatted shell (or volume) mesh.

well,

i have hypermesh v10 and star 4.06.

i create a mesh in hypermesh and then i export it as nastran via the cfd profil - ultilities - star mesh, in the directory i can see the file .nas
after that i open the star cd and import the nas file but
the star can count the nodes but i can not see the model to my screen and also the geometry,

i try to do the exable of hyperstury of the elbow with the star and even the elbow mesh is noe viewetable to star.... and i do not know why !!!!!
since it can see the aspect ration etc why my screen has not the model???

On the HM side, I use the Nastran user profile & export with a custom template. I just tried the Nastran profile with the default nastran template & it worked. I also tried the CFD user profile with the CFD template & it worked.

I use a custom template to get the collectors to end up in different cell types. With the default nastran template you don't get that behavior - all collectors end up in one cell type. The CFD profile/template approach yields each collector in a different cell type - nice.

On the Star4 side, I am using the Auto-Mesh classic Import/Organize CAD data panel. File type is set to NASTRAN & Nastran NPID option is set to material.

Your description gives me the impression STAR is having trouble with the element portion of the NASTRAN deck. If you do a cell count, do you have any cells? Can you inspect the nastran file & see if it is formatted/written correctly?

finally i did it !!!! there was an issue at the cfd template !!!!!!

but not i run the analysis and getting this error



the application fail to initialize properly

do you know what it is meaning

No, I do not.