CFD Online Discussion Forums

CFD Online Discussion Forums (
-   Siemens (
-   -   need some help for meshing on BWB (

afiqroslan January 10, 2011 11:56

need some help for meshing on BWB
i need some help for meshing value on BWB UAV model that i have designed on CATIA..this model about 0.348 m span, 0.03995 m2
wing-body plan form area, 0.114 m mean chord..i already run this problem but,get wrong result..i think that the mesh i put is totally wrong..need some help please..

ara1362 April 1, 2011 18:43

Try 2mm for base size. turn on curviture refinment on for the remesher, cad projection for the wraper. min size 25% of base, target 200% of the target. make sure you put prism layers everywhere, start with 3 layers 1mm, then adjust that based on Y+ value.

dnsantosh January 25, 2012 05:18

which airfoil u used for BWB

All times are GMT -4. The time now is 22:19.