 |
 |
 |
|
|
|
[Sponsors] | ||||
September 20, 2011, 04:23
|
Divergence problem running a DFBI
|
#1 |
|
New Member
Join Date: May 2011
Posts: 6
Rep Power: 15  |
I'm trying to simulate the behaviour of a propeller thrusted airplane using Superposed Rotation. My geometry is composed by sub domain containing a propeller and a main domain containing the aircraft and this sub-domain. The reason for the sub domain is that the mesher doesn't have to re-do the mesh for every rotation in all the space but only in the sub-domain containing the propeller. The problem i encounter is that my simulation diverge. Someone can help? thanks in advance
additional info the propeller is rotating at 10000 rpm and time step is 1 x e-04 |
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem with viewing graphic view when running in UNIX | pitisrisuk | Main CFD Forum | 1 | April 15, 2016 11:39 |
| RSH problem for parallel running in CFX | Nicola | CFX | 5 | June 18, 2012 18:31 |
| Problem with running FoamX in a distributed environment | susana | OpenFOAM Pre-Processing | 1 | March 28, 2007 17:11 |
| Divergence problem on different meshes | Harry | Main CFD Forum | 2 | September 26, 2006 00:23 |
| Problem running FINE Turbo | Michal Vanco | Fidelity CFD | 0 | June 7, 2004 06:58 |
Linear Mode
