|
[Sponsors] |
October 25, 2011, 02:39 |
mesh issue
|
#1 |
Member
adam
Join Date: Oct 2011
Posts: 52
Rep Power: 14 |
Can anyone tell me whats happening with the mesh in this picture? Why does their appear to be small discontinuities here and there (lines crossing cells, etc.).
|
|
October 27, 2011, 08:16 |
|
#2 |
New Member
Join Date: May 2010
Posts: 14
Rep Power: 15 |
You are using a trimmed mesh. Those lines are the faces of the cells. Not all cells are cubes. The cells that have the lines have two triangular faces instead of one square one.
This is not a problem and it is part of this mesh type |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mesh motion with Translation & Rotation | Doginal | CFX | 2 | January 12, 2014 07:21 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 22:11 |
deforming mesh issue : I don't get how stiffness works | bennn | CFX | 9 | October 12, 2010 16:09 |
Convergence moving mesh | lr103476 | OpenFOAM Running, Solving & CFD | 30 | November 19, 2007 15:09 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 19:10 |