CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens

need some help for meshing on BWB

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By afiqroslan

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 10, 2011, 11:56
Default need some help for meshing on BWB
  #1
New Member
 
mohd afiq
Join Date: Jan 2011
Location: malaysia
Posts: 2
Rep Power: 0
afiqroslan is on a distinguished road
hi
i need some help for meshing value on BWB UAV model that i have designed on CATIA..this model about 0.348 m span, 0.03995 m2
wing-body plan form area, 0.114 m mean chord..i already run this problem but,get wrong result..i think that the mesh i put is totally wrong..need some help please..
tq
dnsantosh likes this.
afiqroslan is offline   Reply With Quote

Old   April 1, 2011, 19:43
Default
  #2
New Member
 
ara
Join Date: Apr 2011
Posts: 8
Rep Power: 14
ara1362 is on a distinguished road
Try 2mm for base size. turn on curviture refinment on for the remesher, cad projection for the wraper. min size 25% of base, target 200% of the target. make sure you put prism layers everywhere, start with 3 layers 1mm, then adjust that based on Y+ value.
ara1362 is offline   Reply With Quote

Old   January 25, 2012, 05:18
Default
  #3
New Member
 
SANTOSH
Join Date: Jan 2012
Posts: 10
Rep Power: 14
dnsantosh is on a distinguished road
which airfoil u used for BWB
dnsantosh is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
first Internal Engine simulation with STAR-CCM+ Weisser Siemens 8 January 10, 2011 11:53


All times are GMT -4. The time now is 08:28.