CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFD Online Community > Site Help, Feedback & Discussions

Picture doesn't appear

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By pete

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 19, 2014, 08:50
Default Picture doesn't appear
  #1
Senior Member
 
Paulo Vatavuk
Join Date: Mar 2009
Location: Campinas, Brasil
Posts: 196
Rep Power: 17
vatavuk is on a distinguished road
Hi,
In my previous post (see bellow) I tried to add a picture from a dropbox link and it didn't work. What should I do so that the picture appears in the post?
http://www.cfd-online.com/Forums/ope...tml#post519741
Best Regards,
Paulo

Last edited by vatavuk; November 19, 2014 at 09:58.
vatavuk is offline   Reply With Quote

Old   November 20, 2014, 14:02
Default
  #2
Administrator
 
pete's Avatar
 
Peter Jones
Join Date: Jan 2009
Posts: 682
Rep Power: 10
pete will become famous soon enough
With dropbox you must use the dl.dropbox.com address to display an image. Using the www.dropbox.com address does not point directly to the image but to a webpage with the image on, so that does not work. To include your image I would write:

[IMG]http://dl.dropbox.com/s/ufrbjwhtxc9ajvp/C.jpg[/IMG]

Writing this in your post would show this:

ali.m.1 likes this.
pete is offline   Reply With Quote

Old   November 21, 2014, 06:54
Default
  #3
Senior Member
 
Paulo Vatavuk
Join Date: Mar 2009
Location: Campinas, Brasil
Posts: 196
Rep Power: 17
vatavuk is on a distinguished road
Thank you Pete.
vatavuk is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Replay control - save picture zboud ANSYS Meshing & Geometry 13 June 16, 2016 15:33
How to sketch from a picture in Design Modeler jatin1990 ANSYS Meshing & Geometry 1 September 30, 2014 03:32
[General] export picture messy problem chenxizh ParaView 1 January 10, 2014 16:38
Help!!How can I label crank angle on post picture? Duan J Q Siemens 4 October 10, 2007 09:20
how i can post picture here to show my question? prayskyer CFX 2 October 8, 2006 07:47


All times are GMT -4. The time now is 03:37.