Home > Forums > Software User Forums > Siemens > STAR-CCM+

Unsteady atmospheric boundary layer in LES

Mark Forums Read

Reply

Search this Thread

August 31, 2012, 08:03	Unsteady atmospheric boundary layer in LES	#1
hyderkhan74 Member hayder Join Date: Jan 2012 Posts: 32 Rep Power: 15	Hi Is there anyone who used the Kataoka method to generate an atmospheric boundary layer in star ccm+ ? and how to do this ? Thanks in advance

Reply

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blasius boundary layer coupled with thermal boundary layer	primary.destination	Main CFD Forum	0	May 7, 2012 03:55
[GAMBIT] 3D boundary layer and meshing problem in GAMBIT 2.4.6	prashanthreddyh	ANSYS Meshing & Geometry	1	December 20, 2011 01:35
RPM in Wind Turbine	Pankaj	CFX	9	November 23, 2009 05:05
How to generate a atmospheric boundary layer	Morten Andersen	CFX	3	January 16, 2007 07:48
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 05:15

All times are GMT -4. The time now is 14:06.