|
[Sponsors] |
Heat transfer simulation of Gel(high viscous fluid) on a solid plate |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
Senior Member
Join Date: Dec 2011
Posts: 121
Rep Power: 13 ![]() |
Hi everyone,
I'd like to have a heat transfer simulation of a sintering process. A thin layer of the combination of a metal powder and a solvent (which lied on a solid plate) should be heated and the thermal behaviour should be observed. (the geometry can be seen in the attachment below) Does anybody have an idea about the models can be used for the combination of the solid powder and the fluid? I guess there are some difficulties like boiling after heating , or considering the non-Newtonian fluid .... . I would appreciate any idea or suggestions... Thanks in advance. |
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Enforce bounds error with heat loss boundary condition at solid walls | Chander | CFX | 2 | May 1, 2012 20:11 |
CFX doesn't continue calculation... | mactech001 | CFX | 6 | November 15, 2009 21:25 |
Solid Heat Transfer Simulation | diego flore | FLUENT | 0 | February 29, 2008 19:06 |
Conjugate Heat Transfer between fluid and solid | Li Yang | Main CFD Forum | 8 | March 27, 2004 11:05 |
Terrible Mistake In Fluid Dynamics History | Abhi | Main CFD Forum | 12 | July 8, 2002 09:11 |