channel simulation geometry

p_dey93 · March 17, 2013, 20:17

I conducted 3D DNS study of turbulent flow in a channel with a computational domain of 2pi* 2pi* 2. It has periodic boundary conditions in x (2pi) and y(2pi). z is wall-normal direction (2). The grid is 256^3. I would like to conduct the same simulation in STAR-CCM+. As i am beginner level user, I am wondering how to create the same geometry in star-ccm+ and set-up the periodic boundary condition. Since in star-ccm+, geometry is started with 3D-CAD model by sketching in a certain plain and then performing extrusion/rotation etc. Appreciate any feedback!

flotus1 · March 20, 2013, 05:17

If you do the first tutorial on geomety creation in CCM+, you know more than enough to create the domain you need.

March 17, 2013, 20:17	channel simulation geometry	#1
p_dey93 New Member pdas Join Date: Feb 2013 Posts: 2 Rep Power: 0	I conducted 3D DNS study of turbulent flow in a channel with a computational domain of 2pi* 2pi* 2. It has periodic boundary conditions in x (2pi) and y(2pi). z is wall-normal direction (2). The grid is 256^3. I would like to conduct the same simulation in STAR-CCM+. As i am beginner level user, I am wondering how to create the same geometry in star-ccm+ and set-up the periodic boundary condition. Since in star-ccm+, geometry is started with 3D-CAD model by sketching in a certain plain and then performing extrusion/rotation etc. Appreciate any feedback!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Modify the geometry and mesh during a simulation	virgy	STAR-CCM+	1	January 10, 2013 14:55
repeat geometry simulation	DamanLB	FLUENT	0	November 20, 2012 13:15
CFX 2D geometry simulation	NIMAR	CFX	0	January 4, 2011 09:41
2D open channel simulation	jrbarayal	FLUENT	0	February 28, 2010 16:45
Semicircular Channel	mylavarapu.1	CFX	2	April 6, 2009 18:17

March 20, 2013, 05:17		#2
flotus1 Super Moderator Alex Join Date: Jun 2012 Location: Germany Posts: 3,399 Rep Power: 46	If you do the first tutorial on geomety creation in CCM+, you know more than enough to create the domain you need.