CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   STAR-CCM+ (https://www.cfd-online.com/Forums/star-ccm/)
-   -   Boundary condition in star CCM+ (https://www.cfd-online.com/Forums/star-ccm/121527-boundary-condition-star-ccm.html)

amarjogot July 30, 2013 15:10

Boundary condition in star CCM+
 
Hello everyone, I am having some problem with my model. While simulating this model in Fluent I used outflow for my outlet. Can anyone please tell me what boundary condition can replace outflow in star CCM+.

Kasey July 30, 2013 15:17

pressure outlet

amarjogot July 30, 2013 15:44

Thank you very much Kasey. Do i need to change the turbulent intensity ratio (TIR) or voscosity ratio (TVR), because at the inlet TIR = 1 and TVR = 10.

siara817 July 31, 2013 04:14

you should find in literature source about turbulent intensity.

amarjogot August 6, 2013 15:42

1 Attachment(s)
Thank you very much everyone. My model is running fine. Now I am trying to create finer mesh at the middle part of my cylinder (throughout) ( shown by the red sign in the figure). Could you please tell me how can I do that. Thanks in advance for your help.

Zoheb


All times are GMT -4. The time now is 00:56.